Product display
Water cooled dual cool unit(30-100kW)
Dual cool unit
Renovo dual-cooled units equipped with two totally independent circuits they are direct expansion and chilled water. This unit is usually used where an installation has a chilled water source which the service cannot be continuously relied on. In this case function priority is given to the chilled water circuit, with the microprocessor controls when the chilled water supply fails or if the water is not cold enough to dissipate the entire heat load. Alternatively the unit can be set to priority direct expansion cooling, activating chilled water operation only in the event of a compressor malfunction. Both air-cooled and water-cooled can be applied in DX system.
|
Indoor unit Model |
RDT-RUT |
030A |
042C |
057C |
064C |
080D |
090D |
100D |
|
Cooling capacity（Indoor condition：24℃-50%RH,water-cooled DX type） |
||||||||
|
Total Capacity |
kW |
31.6 |
45.3 |
58.2 |
66.6 |
82.3 |
92.8 |
101.5 |
|
Sensible Capacity |
kW |
29.8 |
42.6 |
55.3 |
62.3 |
76.7 |
86.8 |
93.5 |
|
Cooling capacity（Indoor condition：24℃-50%RH，chilled water temp:7/12℃） |
||||||||
|
Total Capacity |
kW |
28.3 |
39.1 |
51.2 |
51.2 |
62.5 |
64.5 |
65.3 |
|
Sensible Capacity |
kW |
27.6 |
38.2 |
50.2 |
50.2 |
60.0 |
61.0 |
62.0 |
|
Cooling capacity（Indoor condition：24℃-50%RH，chilled water temp:10/15℃） |
||||||||
|
Total Capacity |
kW |
18.1 |
25.7 |
33.1 |
33.1 |
40.0 |
45.0 |
45.0 |
|
Sensible Capacity |
kW |
18.1 |
25.7 |
33.1 |
33.1 |
40.0 |
The next article
Air-cooled dual cool unit(from 30-100kW)
|